How To Fix A Leaky Faucet

Tips on How To Fix A Leaky Faucet provided by Boulden Brothers.How To Fix A Leaky Faucet Handle and Replace Cartridge

A leaking faucet cartridge can be a source of constant irritation, not to mention the water waste it can cause. You’re in the right place if you’ve been struggling with a leaky bathroom sink or trying to figure out how to fix a leaky faucet, single-handle, and double-handle. At Boulden Brothers, we will guide you through replacing a single-handle faucet cartridge and provide tips for handling a double-handle situation. If you struggle and need a professional to install a new faucet, don’t hesitate to call a Boulden Brothers expert plumber.

Firstly, before we dive into how to replace a faucet cartridge, it’s essential to determine when to replace it. If you notice a persistent leak or the handle is becoming increasingly difficult to turn, it might be time for a replacement. Sometimes, a cleaning might fix the problem, but replacing is the way to go if that doesn’t work.

How to Replace a Single Handle Faucet Cartridge: Insights from Boulden Brothers Plumbing

At Boulden Brothers Plumbing, we understand the inconvenience of a leaky faucet – the constant dripping, the waste of water, and the annoying sound. While we are always ready to assist with all your plumbing needs, we know some homeowners prefer the DIY route. So, we’ve put together this comprehensive guide on how to fix both a single-handle and a double-handle leaky faucet.

Tips On How To Fix A Leaky Faucet – Single-Handle

  1. Turn Off the Water Supply: Always start any plumbing project by turning off the water supply to avoid potential water damage.
  2. Remove the Handle: Single-handle faucets typically have a screw hidden under a cap on the handle. Use a small flat-head screwdriver to remove the cap and a Phillips-head screwdriver to unscrew the handle.
  3. Remove the Cartridge: With the handle removed, you’ll see the cartridge. There might be a locking nut holding it in place. Remove the nut, then pull the cartridge straight up and out of the faucet body.
  4. Replace the Cartridge: Apply the plumber’s grease to the o-rings on the new cartridge before inserting it into the faucet body, ensuring it aligns correctly.
  5. Reassemble the Faucet: Screw the locking nut back on, then replace the handle and secure it with the screw. Finally, replace the cap on the handle.
  6. Test Your Work: Turn the water supply back on and test the faucet. If there are no leaks, you’ve successfully fixed your single-handle faucet!

Tips On How To Fix A Leaky Faucet – Double-Handle

  1. Turn Off the Water Supply: The first step remains the same – turn off the water supply.
  2. Identify the Leaky Handle: Since there are two handles, you must identify which is leaking. Once determined, focus on that handle.
  3. Remove the Handle: The handle is usually attached by a screw on the top under a decorative cap or on its side. Unscrew it and remove the handle.
  4. Replace the Washer: Underneath the handle, you’ll find a stem to unscrew to reveal the washer. If the washer is worn or damaged, this is likely the cause of the leak. Replace it with a new one of the same size.
  5. Reassemble the Faucet: Screw the stem back into the faucet and replace the handle. Tighten the screw to secure the handle, but be careful not to over-tighten it, as it can cause damage.
  6. Test Your Work: As with the single-handle faucet, you must test your work by turning the water back on. If there are no more leaks, your mission has been accomplished!

If you’re uncomfortable doing these repairs or the problem persists, call the professionals at Boulden Brothers Plumbing. We are committed to solving your plumbing issues swiftly and effectively, ensuring you peace of mind and a leak-free faucet.

Remember, DIY repairs should only be conducted if you’re confident in your abilities. If you have any doubts, hiring a professional like Boulden Brothers is always best to ensure the job is done right the first time, saving you time and potentially costly mistakes.

How to get the cartridge out of the faucet?

This leads us to the often-asked question, how to get the cartridge out of the faucet? With a pair of pliers, carefully turn and pull the cartridge to remove it. Remember, avoiding damaging the faucet during the sink cartridge removal is essential.

Next, place your new cartridge where you removed the old one. Screw it in place, and then reattach the handle. Turn your water supply back on to see if the leak has stopped.

Now, what about those homeowners trying to figure out how to replace a faucet cartridge double handle or fix a leaky bathroom faucet with two handles? The process is similar, but you’ll need to repeat the steps for each handle.

Whether it’s fixing a cartridge faucet, removing a cartridge from a faucet, or dealing with a two-handle bathroom faucet repair, remember that sometimes the problem may be too complicated or require specialized tools.

If you need more clarification, it’s always best to call in a professional like Boulden Brothers. Our team of experts is well-versed in every aspect of faucet repair and replacement, ensuring your plumbing fixtures are in good hands.

If your bathroom faucet is giving you trouble, don’t ignore it. A dripping faucet can waste gallons of water and drive up utility bills. Remember, when it comes to replacing bathroom faucet cartridges or tackling any plumbing issues, Boulden Brothers in Newark, DE, is just a call away.