Boulden Brothers

Plumbing, Heating, AC, Electrical

  • Services
    • Heating & AC

      AC Maintenance
      AC Repair
      AC Installation
      Heater Maintenance
      Heater Repair
      Heater Installation
      Oil Heater Services
      New Thermostat
      Furnace Maintenance
      Furnace Repair
      Furnace Installation
      Heat Pump Repair
      Boiler Services
      Ductless Mini-Splits
      Indoor Air Quality
      Duct Cleaning
    • Plumbing

      Plumbing Repairs
      Water Heaters
      Solar Water Heaters
      Tankless Water Heaters
      Hybrid Water Heaters
      Drain Clearing
      Drain Unclogging
      Drain Cleaning
      Hydro-jetting
      Garbage Disposals
      Well Pump Repair
      Sump Pump Repair
      Faucet Installation
      Sewer Line Repair
      Sewer Replacement
      Toilet Repair
      Toilet Installation
      House Repiping
      Water Line Repair
      Water Line Replacement
      Water Softeners
      Water Treatment
    • Electrical

      Electrical Repairs
      Panel Replacement
      Meter Can Replacement
      Electrical Troubleshooting
      Whole Home Surge Protection
      Circuit Repair
      Lightning Strikes
      Breakers & Fuses
      Outdoor Lighting
      Electrical Grounding
      Outlet Installation
      House Rewiring
      Safety Inspections
      EV Charging Stations
      Chandelier Installation
      Lighting Installation
      Ceiling Fan Installation
      Smoke Detector Installation
      Emergency Electrical
    • Boulden Brothers AC Technician and Customer
  • Club
  • About
    • Our Company
    • Special Offers
  • Careers
  • (302) 368-3848
  • Schedule Now

7 Reasons Your Air Conditioner Is Not Working

When it is hot outside, you rely on your air conditioner to provide comfort and relief. When it’s not working, you are left feeling miserable in the inescapable heat.

Unfortunately, air conditioners always seem to quit on us in the middle of the hottest day of the year. This is not by accident. Usually, this occurs because a neglected air conditioner can appear to work fine for the sporadic times it needs to run in spring and early summer, but the issues begin to surface when it is running more days in a row and for longer amounts of time on each of those days. The heavy strain can cause worn parts to finally stop working and for the whole system to become less efficient and you’ll need an air conditioner repair.

To avoid an uncomfortable summer, the best thing you can do for your air conditioner is to schedule a tune-up every year and frequently replace the air filters. During an inspection, a certified technician will be able to spot potential problems and offer solutions to fix them before they cause a complete breakdown later on in the season.

If you notice a problem with your air conditioner when you turn it on for the first time in the year, it’s important to call an experienced HVAC company right away to help you determine the issue at hand. You can then take care of the problem, or replace the unit if necessary before the hottest days of summer arrive.

There are many reasons why your air conditioner isn’t working how you would like, whether it’s the beginning, middle, or end of the season. Below are a few common reasons why your air conditioner could not be working

Why Is My Air Conditioner Not Working? Here Are 7 Potential Causes

A faulty air conditioner is at best irritating and at worst a health risk. For at-risk individuals, an unreliable air conditioner can lead to indoor heat exhaustion and heat stroke if the home heats to dangerous enough levels. If you can, rule out a few of the below reasons why your air conditioner may not be working before you call a technician, this may help them discover the real reason behind your cooling troubles that much faster.

7. Low Refrigerant

Without refrigerant, your air conditioner would have no way to cool the air before pumping it back into the home. If your home isn’t cooling as efficiently as it used to or it is not cooling down at all, despite the air conditioner running, then you may be low on refrigerant. You shouldn’t have to top off or replace the coolant in its closed line, so there may be a leak somewhere in the line if it is much lower than the typical amount. Replacing a refrigerant line and filling it with more refrigerant may be more expensive if your air conditioner is older and still uses freon as the refrigerant. For newer models, repair may be less expensive.

6. Frozen Coils

Refrigerant runs through the evaporator coils to cool the warm air that comes into contact with the coils before entering the home. If there is an air circulation issue and warm air can’t get to the coils, the coils may freeze from the lack of heat transfer. The frozen coils then can’t cool the air down enough to maintain adequate temperatures in the home.  You can try to solve this issue by changing out any dirty air filters and inspecting the return air ducts for any obstructions. If this doesn’t work, then you may need help from a professional.

5. Dirty Coils

Dirty condenser coils prevent the hot air from escaping into the atmosphere outdoors. This means your unit has to work harder to keep your home cool. If your home isn’t reaching cool enough temperatures for your preferences, then you may be overdue for an AC tune-up. Ignoring this issue can cause parts to wear out faster and lead to a premature unit failure.

4. Faulty Electrical

From switches accidentally turned off, to breakers being flipped, to wires simply wearing out, there are many electrical issues that can be causing your air conditioner to not work. First, check to make sure that the indoor and outdoor disconnect switches are turned on.

Then, check your breaker box for any tripped breakers. If the breaker keeps tripping after reset, there may be something else connected to that line using part of the power. Turn it off and see if that helps. If it doesn’t, then you may need help from a professional electrician.

If none of these is the issue, then you might have a dead “start” capacitor or a dead “run” capacitor. These will need to be replaced by a certified technician. If your unit simply isn’t turning on or running, despite the thermostat working, then there is most likely an electrical component that needs repair or replacement.

3. Broken Fan

If either of the two fans inside the air conditioner stop working, turn off your air conditioner right away. Keeping the unit running can cause more damage and lead to significant repair or replacement in a short amount of time. If you catch this issue soon enough, it may be a simple fix of lubricating parts, replacing a belt, repairing the motor, or cleaning dirt and grime off of essential components.

If ignored, not only will your home not cool properly, but your air conditioner’s compressor will eventually fail. At this point, it’s usually more cost-effective to replace the air conditioner rather than repair it.

2. Leaky Ducts

From pinholes to large gaps in ductwork, any amount of escaping air can make your air conditioner less efficient and increase your cooling costs. Holes and gaps can be caused by animals or shoddy installation work. If no obvious gaps are present, then a professional technician can perform a test to check for smaller holes throughout the system. Either way, duct repair and replacement should be performed by a professional.

1. Thermostat Issues

Lastly, your air conditioner problems may be stemming from your thermostat. If the thermostat doesn’t seem to be working at all, replace the batteries or the unit itself to get it working again. Then, make sure your thermostat is set to the appropriate setting. You may just have it set to heat or fan instead of the cool setting.

Luckily, these are all simple fixes any homeowner can solve. If your unit still isn’t turning on, you may have an electrical problem or some other issue causing your faulty air conditioning.

How Can I Prevent The Need for AC Repairs?

Nobody wants to deal with a broken air conditioner, especially during the heat of summer when it is needed the most. To prevent an untimely breakdown, you as the homeowner can take the following steps:

  • Frequently replace the air filter. This should be done at least every 3 months, or more if you have pets. Adequate airflow is essential for proper air conditioner functioning. Obstructed airflow can lead to a whole host of problems, not to mention lowers the air quality in your home as well. Simply open the filter door to your unit, take note of the exact size of the air filter, and replace it with one that snugly fits in your unit. The higher MERV score the air filter, the more it will filter out of the air, such as allergens, germs, and dust.
  • Clear debris from around the unit. Fallen leaves, twigs, and other debris can build up around the outdoor unit, which can impede proper airflow. Make sure you clear this debris before you turn on your unit for the first time each year. Also, leave enough clearance around the unit from other nearby objects.
  • Schedule a yearly tune-up. A yearly tune-up from a qualified professional will help your air conditioner lasts as long as possible and run efficiently as possible from year to year. It may also help your warranty stay valid if you have a newer unit. Your technician can alert you to any repairs needed from year to year, which can help prevent larger issues from totally disabling the unit. A typical air conditioner can last between 10 and 15 years with regular maintenance.
  • Call the professionals at any sign of trouble. If your air conditioner is on the fritz and you have completed the basic troubleshooting steps mentioned above, then the problem may need a professional to help solve. There’s no reason to suffer unnecessarily when expert help is only a phone call away. You may even catch a small issue before it grows into something irreparable.

Filed Under: Cooling, HVAC

Improving Indoor Air Quality

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”Text” _builder_version=”4.2.2″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″]

It seems like more and more people are dealing with allergies. Unfortunately, staying indoors doesn’t always help. Here are a few tips for improving the quality of your indoor air.

  1. Keep the windows closed.

Most people think they need to open up all the windows in the house to enjoy a nice springtime day. The problem is, you’re inviting pollen and all the particulate from outside to visit your home. When my boys were struggling with allergies, we wouldn’t open the windows even if it was a nice day. Instead, it’s a great idea to turn your HVAC unit’s fan to ‘on’ so it’s continually circulating the air in the house.

  1. Pay attention to the filtration.

Make sure you have a good filtration system so that particulate will be effectively removed from the circulating air. There’s variance in both quality and efficiency. Cheaper slide-in filters have a MERV rating. More elaborate filtration systems have an efficiency rating on them. With a little bit of homework, you can see the huge difference between a very inexpensive home improvement store filter and a top-quality filter on the market.

Make sure that you change the filter as needed because some filters decrease in efficiency as they get dirty. Other filters actually increase in efficiency as they become clogged. They’ll do a better job of stopping more particles from circulating in the air. Unfortunately, the clog will also start to damage airflow and hurt the efficiency and longevity of your HVAC system. Your best bet is to change the filter based on the recommendation for that specific type.

  1. Don’t pollute the air.

There are many things homeowners do that could have a detrimental effect on air quality. If you introduce something into your home, it’s probably going to stay there for a while. That’s why the EPA says that indoor air is more polluted than outdoor air. Smoking indoors, burning candles or oil lamps, and even cleaning products can introduce particles into the air. Make sure you’re using products that are safe because they’re going to stay inside your home for a long time.

  1. Clean your ductwork.

Having your ductwork cleaned is something that we believe should be done every two to three years. (We spoke more in-depth about this subject in a previous blog post.) The number of people and pets in your home can make a difference. You stand to benefit when it comes to improving indoor air quality by making sure your ductwork has been cleaned. Whenever someone purchases an improved filtration system from us, we recommend the ductwork is cleaned before installation.

When you’re dealing with an air conditioning system, there’s often moisture in a dark environment. (Our experience with plumbing has made us aware that hidden leaks could also cause bacteria growth.) We can’t say that mold has developed with certainty unless we send a sample to the lab. However, homeowners definitely have to be careful about biological growth in the duct system. As a solution, we sell ultraviolet lights that will kill off that biological material.

If you want us to help improve your indoor air quality by installing an improved filtration system or cleaning your ductwork, give Boulden Brothers a call or contact us online.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Filed Under: Cooling

Why You Should Leave Vents and Registers Open

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”Text” _builder_version=”4.2.2″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″]

Air Conditioner Is Not WorkingWhen it comes to saving money on heating every year, we hear the same things.  But, while “put on a sweater and lower the thermostat” is good, “close vents in unused rooms” is more damaging than it’s worth.  Sadly, it seems like common sense so we find people closing vents and registers in the hope of saving a few dollars every month.  With heating and cooling making up roughly half of our energy bill every month, you’d think that every bit helps.  But what if the dollars you save just get put towards future repairs caused by the attempted savings?

Basic Ventilation Principles

First, how does ventilation actually work in your home?  Houses are mostly closed systems, with controlled filtration that keeps the air clean and clear.  As a closed system, this means that nothing is moving the air internally.  A blower fan works to circulate the air throughout your home.  The moving air redistributes heat by either dumping it into condenser coils or picking it up from the furnace.

There are two basic types of motors used in these fans.  One is a variable motor that can adjust itself based on the amount of pressure it’s seeing, while the other runs at the same rate regardless of external conditions.  Because the second one is less complicated and slightly cheaper, it’s more common in homes.  Unfortunately, this means that your home, more than likely, is going to be working harder to move air through a smaller space.

Air moves in a cycle, as it leaves a space, more air replaces it.  This is why your home uses a system of vents and registers to move air through the building.  When you close an air vent, you reduce the number of avenues available to moving air, restricting flow.

Pressure Problems

This moves us to the major problem with closing air vents: pressure.  From the ducts to the climate control unit, whether it’s heating or air conditioning, your system has been sized to suit the needs of your home.  The amount of air that your blower fan can move is suited to the flow rate of your ventilation system and the size of your home.

The reduction in airflow is a problem for effective heating.  On the standard motor used in most household blower fans, that increased pressure means that air flows at a lower rate, leading to problems with heat transfer.  Additionally, the increased pressure means a higher chance for hot air to escape through existing leaks or to cause new leaks in your ducting.

Of course, if you have a variable motor, the reduced airflow is not a problem.  The fan motor will ramp up, increasing airflow against the additional pressure.  But this comes at the cost of the energy you might have saved otherwise.  Variable motors work themselves harder to make up for the decrease in airflow, decreasing lifespan, and costing you more in energy to operate the fan.

Heat Backup

We mentioned that one drawback to closing vents is a problem with heat exchange.  When airflow is reduced, the air is not refreshed quickly enough for proper heat exchange to take place.  Hot air moves into the room at a lower rate, leading to colder rooms or longer furnaces on-cycles.  In a heating system, the reduced flow rate means that the temperature of the heat exchanger will increase as the air around it stays hotter for longer.  That increase in heat can lead to a cracked heating coil or exchanger, as it isn’t able to give off the heat quickly enough to prevent damaging itself.

During the summer, you’ll find a similar issue with air conditioners.  Less heat will be deposited into the condenser coil.  It will cool down, leading to a formation of ice.  Since ice is an insulator, it makes it more difficult for the condenser to release heat.  It will freeze over, eventually leading to compressor damage and home with high heat and humidity.

Alternatives for Saving Money

While it’s not guaranteed that closing vents will lead to permanent damage, it will cause your system to work harder than it needs to.  Often, the rooms you try to keep climate-controlled will stay at the temperature you want, but you won’t save more than one or two dollars, and that’s only if your climate control system is improperly sized, to begin with.

So what can you do to reduce costs during the winter (or any season really)?

  • Adjust the thermostat so your system operates less
  • Leave doors to extreme temperature rooms open to help distribute heat evenly
  • Use a ceiling fan to circulate existing air
  • Use a thermally reflective film on your windows to reduce heat transfer
  • Test your system to see if upgrading to a more energy-efficient unit will help

If you still have any questions or want to upgrade to a more efficient system, give us a call at (302) 368-3848 for any of your Delaware, Maryland, and Pennsylvania home service needs — plumbing, electrical, HVAC, propane, and more!

Call us 24 hours a day, 7 days a week to answer any questions you might have.

For more expert tips on maintaining a safe and efficient home, visit us on our website, Facebook, Twitter, and Google+.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Filed Under: Blog, Cooling, Heating, HVAC

Improve Indoor Air Quality with These 5 House Plants

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”Text” _builder_version=”4.2.2″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″]

We spend the majority of our lives behind closed doors.  From the homes that shelter us from the elements to the offices and buildings where we work, a climate-controlled environment makes up all but our commutes.  Every room is temperate, with carefully filtered air that’s clean and easy to breathe.  Or at least, that’s the goal of it.  The truth is, some buildings have more trouble with air pollution inside than out.  These contaminants can come from all sorts of places too.

Old paint, dust, and mold from carpets or clothing, pet dander, and traces (sometimes in high quantities) of formaldehyde are just a few of the dangerous things floating around in the air.  These contaminants exacerbate allergies, inflame your sinuses to the point of discomfort, and can lead to ongoing respiratory problems.

Ventilation air filters are great for removing larger contaminants like pollen and dust as they pass through the air conditioner, and a UV filter will kill the majority of any germs unlucky enough to get caught in the ventilation system, but there’s one more layer of protection you can put into your home, one that’s just a bit more natural:  Houseplants.  The benefits of houseplants as an anti-pollution filter are well documented by the National Library of Medicine, based on trials done by NASA.  These trials were performed in attempts to deal with air pollution aboard the space station over the long-term residence.

Beyond the bacteria, mold spores, and dust specks that your air filter removes, there are few elements (also known as volatile organic compounds or VOC) that your in-home air and the city smog have in common:

  • Ammonia
  • Benzene
  • Formaldehyde
  • Trichloroethylene
  • Xylene and Toluene

While we could go into the negative effects of each of these, rest assured they are all decidedly harmful to your health.  If you’d like to read more about them (and other indoor air pollutants) we recommend the National Library of Medicine.

While our list of helpful houseplants is by no means exhaustive, we’re presenting the 5 plants which filter more different things out of the air than any other.  Of course, some plants are better at filtering higher quantities of individual VOCs.  And some plants, such as the miraculous aloe vera plant, have multiple other uses beyond just air filtration.  You can find a quick list of NASA’s findings here.

Things to Consider Before Buying a Plant

  1. What is your home climate like? Is the air dry and will the plant need repeated watering throughout the day to account for dry conditions?  Can the plant get plenty of sunlight?
  2. Do you have enough space for your houseplant? Some plants require very little room to grow while others spread out over time and will need constant trimming and care to keep from overrunning the room.
  3. Do you have any pets? Make sure that whatever plant you decide to keep isn’t harmful to any animals you have in the home.  Dogs and cats are especially prone to chewing on plants, so make sure you aren’t growing something poisonous.  What’s fine for you can be disastrous for them.
  4. Flowers generate a great deal of pollen. If you’re going to keep a houseplant, but have severe allergies, consider going with a leafy plant rather than something with flowers.  During the summer seasons, flowers will put pollen into the air which can aggravate allergies.  Your ventilation air filter is only partially successful at dealing with pollen counts when they’re originating from within your home.

The Best Plants for Improving Indoor Air

 

Peace Lily (Spathiphyllum ‘Mauna Loa’)

Starting our list, the Peace Lily is a beautiful plant (as well-kept lilies are) which filters all of the VOCs we’ve mentioned today.  A flowering plant, the Peace Lily will add pollen to the air during the summer, but throughout the year it does an excellent job of trapping VOCs and mold spores.  These contaminants are gathered by the leaves where they’re pushed towards the roots and processed for nutrients.

Florist’s Chrysanthemum (Chrysanthemum morifolium)

Image used courtesy of Forest and Kim StarrThe often-difficult-to-pronounce chrysanthemum (mum’s the word if you prefer) is a beautiful flower that will make for a wonderful arrangement in your home.  It’s also excellent for removing ammonia, formaldehyde, xylene, toluene, and benzene from the air.  Benzene is a common household chemical compound, found in detergents, glues, paints, and plastics.  Decorating your house with chrysanthemums will help to reduce the impact of benzene.

English Ivy (Hedera helix)

English Ivy is almost as good as our two previous plants.  It trades ammonia filtration for lower pollen output, a much more hypoallergenic plant than either of the two flowering plants previously mentioned.  Since it is an ivy, this plant will require more trimming and care to keep it from sprawling out and taking over a room.

Variegated Snake Plant (Sansevieria trifasciata ‘Laurentii’)

Image used courtesy of Forest and Kim StarrThe snake plant ties with English Ivy for cleaning your home’s air but it’s a very hardy plant.  Snake Plants are difficult to kill, require little watering, and prefer drier conditions.  They don’t take up nearly as much room as ivy either.  The Snake Plant is a great way to help with air in an apartment, where controlling the filtration or installing a UV filter is not an option.

Red-Edged Dracaena (Dracaena marginata)

This plant is also fairly difficult to kill, has a low amount of pollen added to the air, and removes VOCs such as benzene, xylene, toluene, and formaldehyde.  But this is not the plant to go for if you have pets, especially cats.  Pets enjoy chewing on plants (it aids with digestion for some, and is simply fun for others), but the Dracaena is toxic to some animals, most notably cats.  If you don’t have a pet, then this easy-to-care-for plant is a great choice.


Now don’t forget that proper ventilation and a good filter are just as effective (and in some cases more so) as natural house plants.  But plants are beautiful and an extra level of filtration for your home.  So if you already have plants, and need a new filter, central heating, and cooling system, or even a UV filter, just contact Boulden Brothers.

Give us a call at (302) 368-3848 for any of your Delaware, Maryland, and Pennsylvania home service needs — plumbing, electrical, HVAC, propane, and more!

Call us 24 hours a day, 7 days a week to answer any questions you might have.

For more expert tips on maintaining a safe and efficient home, visit us on our website, Facebook, Twitter, and Google+.

Floral images are used courtesy of Forest and Kim Starr under a CC license.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Filed Under: Blog, Cooling, Heating, HVAC

How Does Geothermal Heating Work?

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”Text” _builder_version=”4.2.2″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″]

As a kid, I read about geothermal power in a work of science fiction years and years ago.  The idea that clean, free energy existed under the ground without massive refineries, smokestacks, or nuclear plants seemed very futuristic.  A short while later I learned that actual electrical power production using geothermal energy has been possible since the early 1900s, and continues to be used in geothermal hotspots around the world.  But when we talk about geothermal heating and cooling in your home, we aren’t talking about the production of power, just a method to regulate temperatures.  The principle is the same either way, and it’s just as amazing and clean as it was so many decades ago.

How it Works

The core of the Earth is hot, hot enough that it’s mostly molten metal and rock.  Tectonic friction and extreme pressures generate an amazing amount of heat, warming the Earth from inside.  In addition to this, the ground is an exceptional insulator, resisting changes in energy fairly well.  During the summer, the ground just below the surface is warmed and sees little variation in temperature throughout the seasons.  When you move down to about 30 feet, there is almost no change in temperature year-round.

By pushing water beneath the surface into this relatively temperate zone, heat energy can be collected and piped back up into the home where a water radiator warms the entire home.  As an added benefit, this same heating system generates enough heat to act as the hot water system for your home.  All of this is made possible using an electric pump that replaces the refrigerants, compressors, and furnace fuels used in traditional heating and cooling.

Another version of the geothermal system uses an aquifer.  This underground source of water is usually deep enough for the water to already be temperature regulated.  Water from the aquifer is pumped up into the home where it is only used for heating (the water never leaves the radiator pipes) before it is returned to the aquifer.  This kind of heating doesn’t deplete the aquifer and no water needs to be filled into the system before it can begin working.

In short, a geothermal heating and cooling system use water as a way to move heat into a home during the winter and a way to remove heat from a home during the summer.

Benefits Over Traditional Furnaces

When all is said and done, the goal is to regulate the temperature in the home.  So is a geothermal system actually better than a more traditional forced-air furnace?  While there’s never a catch-all system that’s right for everyone, a geothermal system is usually more energy-efficient than a forced-air or fueled system.  Geothermal heating systems also double as cooling systems during the summer, which makes them a total replacement for a typical HVAC system and putting them on par with reversible heat pumps as well (though again, they are more energy-efficient BTU to BTU).

A few other ways where a geothermal system is more beneficial:

  • Some systems can be built completely vertical, using a very little area
  • Water isn’t expended within the system
  • Zero carbon emissions at the home
  • Also heats your running water
  • No toxic refrigerants are used
  • No external fuel needed

In the interest of fairness, the drawbacks to this system are installation costs and work.  If your home isn’t already equipped with a geothermal system, the excavation can take out a sizeable part of your yard (which will take time to restore to normal).  The lawn will regrow but the excavation and installation costs can be extreme.  If you’re building a new house or looking for ways to save on energy in the long run, it’s a worthwhile expenditure.


Give us a call at (302) 368-3848 for any of your Delaware, Maryland, and Pennsylvania home service needs — plumbing, electrical, HVAC, propane, and more!

Call us 24 hours a day, 7 days a week to answer any questions you might have.

For more expert tips on maintaining a safe and efficient home, visit us on our website, Facebook, Twitter, and Google+.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Filed Under: Answer Man, Blog, Cooling, Heating

Contact Us

Your Name(Required)

Boulden Brothers in Newark DE

Contact Us

Address:
107 Sandy Drive, Bldg 700
Newark, DE 19713, US

Phone: (302) 368-3848

Heating and Air

AC Maintenance AC Repair AC Installation Heater Maintenance Heater Repair Heater Installation New Thermostat
Furnace Maintenance Furnace Repair Furnace Installation Heat Pump Repair Ductless Mini-Splits Indoor Air Quality

Plumbing

Plumbing Repairs Water Heaters Tankless Water Heaters Hybrid Water Heaters Drain Clearing Drain Unclogging Drain Cleaning Hydro-jetting Garbage Disposals Well Pump Repair
Sump Pump Repair Faucet Installation Sewer Line Repair Sewer Replacement Toilet Repair Toilet Installation House Repiping Water Line Repair Water Line Replacement Water Softeners

Electrical

Electrical Repairs Panel Replacement Meter Can Replacement Electrical Troubleshooting Whole Home Surge Protection Circuit Repair Lightning Strikes Breakers & Fuses Emergency Electrical
Electrical Grounding Outlet Installation House Rewiring Safety Inspections EV Charging Stations Chandelier Installation Lighting Installation Ceiling Fan Installation Smoke Detector Installation Outdoor Lighting

Copyright © 2023 Boulden Brothers • Plumbing, Heating, Air Conditioning, Electric