For Warwick plumbers today, pipe inspection cameras are a huge aide. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

It is definitely convenient to have a garbage disposal in your Bear home’s kitchen. They make doing the dishes and getting rid of food waste much easier. But just like any other appliance or piece of equipment in your home, your garbage disposal can sometimes develop a problem that causes it to leak or perform inadequately.

Leaky garbage disposals are certainly no fun to deal with. There are several reasons why garbage disposals can develop a leak. There could be an inadequate amount of putty or sealant at the joint where the garbage disposal connects to the drain pipe from the sink. A leak can also spring from that area simply because the bolts holding the two pieces together are not securely tightened.

The point where food and waste exit the garbage disposal and move into the main drainage system is another spot prone to developing leaks. These types of leaks are similar to those that occur between sink drain and garbage disposal and can be remedied in the same way.

In general, the key to dealing with a garbage disposal leak is to locate the source. This will most often be where two pipes come together or where the pipes join the unit. However, as your garbage disposal ages, it is more prone to developing cracks in the body of the unit itself. When this happens, leaks can develop anywhere there is a seam or break in the body of the garbage disposal itself. With this type of leak, the only thing to do is to replace the garbage disposal with a new one.

Leaks are not the only problems that can develop in a garbage disposal either. Sometimes you may notice that your garbage disposal is making an unusual amount of noise when it is turned on. This is often the result of something getting in there that should not have, so you should not continue to run your garbage disposal. Turn off all power to the unit and see if you can reach or see into the garbage disposal to determine what is causing the problem.

If your garbage disposal is not grinding well even though it seems to be rotating fine, you may not be running enough water into it when it is turned on. The water is necessary to facilitate the grinding process, so be sure to keep it going at all times. If that does not solve the problem, you may need to have a professional come out and take a look at your system to find out what is going on.

A proper drainage system is a great asset when you are trying to improve the appearance of your lawn or increase your landscaping options in Christiana. A lawn that does not drain right will have dry and wet spots that make it difficult for plants to grow. Your lawn will develop a spotty appearance because of these types of areas and you will probably also have a smaller area to work with in general.

With a good drainage system, on the other hand, you can make use of your entire yard. As long as water can reach all areas but does not linger too long in any one of them, all of your plants should be able to grow nicely. This is often a project that handymen are inclined to take on themselves, but there are several potential pitfalls when you do. It may not seem all that complicated to put in a drainage system, but you do need to know what you are doing if you want to get the job done right.

In order to function properly, a drainage system needs to be installed on a slope. Water will always run downhill, so making your drainage system run downhill will ensure that gravity will do all the work for you. If the proper slope is not maintained, however, there are plenty of areas where water can pool.

That is exactly the type of situation you are trying to avoid by putting the drainage system in, so all of your hard work could be for nothing if you do not get the slope calculated correctly. While this type of measurement and calculation can be challenging for you, it is second nature to a professional plumber. Hiring an expert to help you with this area of your drainage system is the best way to make sure you have the right setup planned.

You will also need to know where to lay out the drainage system. This involves analyzing the sources of water in your yard and understanding what you need to do to move it from one area to another. Again, this can be a challenging if not overwhelming aspect of the project for a layman, but for a professional it is simply part of the job.

On top of all of that planning, you will need to have the right tools and materials to put the drainage system together. Plumbers already have all of this on hand and they know which tool to use when. Your project will go much more smoothly and you will be assured of much better results if you use a professional to install your drainage system.

A bathtub replacement is not something you will have to worry about every day in Pike Creek. However, there will likely come a time when you do need to get rid of your old tub and put in a new one. Whether your old tub is simply beyond repair or you just decided that it was time for a change, putting in a new bathtub is a significant undertaking.

Even if you have considerable plumbing skills, you would do well to hire an outside contractor to take care of a bathtub replacement or installation project. There are a lot of factors to take into account when you are installing a bathtub in your home, and experienced contractors know what to look for and how to adjust to the various situations that can arise.

For one thing, you will probably have a very hard time physically moving both the old tub being replaced and the new on that needs to go in. And even if you are physically capable of moving this type of heavy equipment, you will still run the risk of damaging other parts of your house in the process. A skilled contractor with a team can much more easily get an old tub out and a new tub in place.

Plus, when you hire a contractor for this type of work, you will most likely not have to worry about how to dispose of your old tub once you are done with it. The majority of contractors will take care of this type of disposal for you, which is a big help since you probably do not want an old bathtub sitting in your yard indefinitely.

Another thing to consider is that the plumbing work needed to properly put a bathtub in place is rather complicated. You need to have relatively advanced plumbing skills in order to carry it out properly. And if you do not manage to complete a proper installation, you will have no end of problems later on. It is well worth the investment to have a contractor come in and install your bathtub when the alternative is paying for more costly repairs later on.

The relationship between water and your shower in your Kenton home is somewhat is paradoxical. You use the water in the shower to keep yourself clean, and you can use water to keep your shower (and everything else!) clean, but if left unchecked, the water itself will leave your shower dirty and spotty.

Those spots left on your shower door are mineral deposits from water that has evaporated, leaving its mineral passengers behind. They are especially problematic in areas with harder water. Here is how you can get rid of them.

The Natural Way

It may surprise you to know that with all the chemicals available on the market for cleaning the bathroom, the best remedies for hard water are actually natural ones: lemon juice and vinegar. They are both acidic, so they can dissolve the mineral deposits, and they rinse away clean.

To use lemon juice (or a lemon), apply it to a damp sponge and wipe the door. You can also squirt the lemon juice directly on the door and wipe it with a sponge. Use this technique and let the lemon juice soak in a bit for tougher stains. Your shower will not only be clean, but it will smell like lemons.

Although it doesn’t smell as nice as lemon juice, vinegar also works well. Don’t forget the cleaning power of vinegar and baking soda, which generates a powerful chemical reaction that helps break up tough stains. For water spots, mix up a paste of vinegar and baking soda. Use a small brush, like an old toothbrush, to spread the paste around the edges of the shower door and on any tough stains. Wipe it clean with a damp sponge.

You can also use vinegar or lemon juice weekly to keep tough deposits from building up.

Other Ideas

There are some other methods you can use if the spots are really stubborn. CLR, for example, can break up very stubborn mineral deposits, but it is also toxic, so use it sparingly. Daily shower cleaner sprays work well to stop water spots from forming if used regularly.

If you are worried that your water too hard (has too many minerals), you can always ask your plumber about awater treatment system.

When you notice a leak in your Felton home, you fix it right away, but what happens when you don’t notice a leak for days or even weeks? The damage it causes can have a profound impact on your water bill and the good repair of your home. To avoid hidden leaks – the ones that hide in your walls or your yard, keep a close eye on your water meter.

The Hidden Leaks

Obvious leaks are…well, they’re obvious. They pour water down the walls, leave puddles in your bathroom or create ponds in your backyard. Unfortunately, the majority of leaks are much less obvious. They result from small drips between pipe joints in your walls or a hairline fracture in your water main or drain pipes. They may not even appear where you can see them.

If this happens, it’s important to have a keen eye for the signs that a water leak has occurred. Specifically, look for jumps in your water meter readings.

Watching the Water Meter

Your water meter tracks every drop of water consumed by your family. To check for water loss, record the reading at the same time every day and watch how it changes. To be sure of a leak, you can turn off all the fixtures in your home and watch for the meter to move. If the meter moves despite the fact that no one in your home is consuming any water, it is likely a leak.

You can also compare your bills from one month to the next. If your bill rises suddenly, without any clear reason, check the meter readings and the rates. If the meter reading increased suddenly and the water rate did not, there might be a leak to blame. If that’s the case, call a professional to inspect your water lines immediately – what is hidden to you might be a relatively obvious, straightforward repair to someone else.

When you look at a drain in your Colora home, it seems fairly simple. You pour things down and they disappear into the ether, never to be seen again. Of course, that logic goes out the window the second the drain starts to backup or overflow. There are things you can do to avoid such problems though and most of the time, they cost nothing and take only a few minutes a week.

Simple Household Drain Maintenance

The first step to avoiding a problem is not putting anything down your drain that might cause said problem in the first place. Specifically, avoid grease, food, or other objects that might build up in your drains if not properly disposed.

Food can be broken down by a garbage disposal or, even better, placed in a compost pile. Grease, however, should never enter your sink at all. Pour all old kitchen grease into a coffee pot or bucket and dispose of it carefully. It can be thrown away in some places, or it can be recycled. Whatever you do, though, don’t pour it down the drain.

Another easy tip to keeping those drains clear is to pour a natural compound down every now and then like dishwashing liquid or baking soda and vinegar. Expensive drain cleaners are not only unnecessary – they are unsafe for the person using them and can cause damage to the pipes if you are not careful. To avoid such damage, stick with hot water based compounds and vinegar. The key is to do it preventatively.

If you wait until a full blown clog occurs, baking soda and vinegar may not get the job done and you’ll need to call a plumberwho has a snake or other equipment to get the clog out.

Professional Maintenance

While regular flushing of your drain with hot water and vinegar allows you to clear out the vast majority of the stuff that builds up there every week, it’s also a good idea to call a professional for annual maintenance. Such annual maintenance involves visual inspection, professional grade clearing of food and waste products and a full flush. Done properly, this will minimize the cost of future repairs and replacements and keep your plumbing running smoothly for years to come.

Lime deposits are what cause that white, chalky, filmy residue that you see on faucets, shower heads and tiles in your Alapocas home. Aside from being unsightly, lime deposits can also cause damage over time. Lime builds up inside theplumbing of your home, slowly degrading your pipes. Below are some tips to get rid of lime in common trouble spots.

Pipes

Lime most often builds up in pipes that carry hot water, since the water heater dissolves the lime in the water. The lime is then deposited on the inside of the pipes when it cools. Here are some steps to clear out the troublesome lime from those pipes:

1. Turn off your water heater and drain it so it is about half full.
2. Remove the pressure valve, being careful to follow the manufacturer’s instructions.
3. Pour solvent into the heater through the open valve. There are commercial products available specifically designed to break up lime deposits, but white vinegar can be used as a cheaper and greener alternative.
4. Replace the pressure valve, turn the heater back on and allow it to fill all the way.
5. Turn on hot water faucets throughout the house. Let the water run until it runs clear or doesn’t smell of vinegar, depending on which solvent you used.

Kettles & Coffeemakers

Mineral deposits in a kettle or coffeemaker can cause your morning beverages to taste bitter. To clean them out, try these techniques:

• Put 2 tablespoons of water softener in your kettle and fill it with water. Bring to a boil and rinse thoroughly. Alternatively, you can use a 1:1 ratio of vinegar and water, then let it sit overnight after boiling.
• Fill your coffeemaker’s reservoir with water plus 2 tablespoons of water softener. Or, fill it entirely with white vinegar. Either way, run it through once that way, then a few more times with pure water to rinse.

For more obvious deposits, like faucets and tiles, usually a combination of hot water and either lime remover or white vinegar will do the trick. You can get more instruction on removing lime scale at HowToCleanStuff.net.

Those are the tried-and-true methods for making your pipes last by keeping lime at bay. Some plumbers will swear to you that putting magnets on your pipes will prevent lime from building up. Data to support that is inconclusive at best, although it can’t hurt to try.

Because it is so specialized and can lead to big messes if handled improperly, your Earleville home’s plumbing is sometimes neglected among routine areas of maintenance. This is a mistake, however, as there are some routine tasks that should be performed on plumbing systems, such as:

• Remove rust, calcium and lime deposits from the water heater
• Cleaning the aerators
• Clearing drain lines
• Sharpening disposal blades

Some of these are simpler than others, but for the most part, unless you are a very savvy homeowner, they should be done by a licensed plumber. Even if you are not up to doing your own plumbing work, there are still plenty of routine things you can do in order to detect potential problems and see if further work is needed.

In the Bathroom

• Unscrew the showerhead and look for deposits of lime, calcium, rust and other minerals.
• Run water down shower and tub drains for signs of slow drainage.
• Inspect the shower/tub for cracked tiles, which can be signs of leakage beneath the surface.
• Flush each toilet with the tank lid off to make sure they are flushing properly and all parts are working.
• Examine all caulking for cracks, gaps or peeling.

In the Kitchen

• Turn on the faucets. See if water leaks out of the knobs, handles or elsewhere.
• Have leaky faucets fixed right away.
• Look beneath the sink for signs of leakage from the exposed drain pipes.

Elsewhere around the House

• Take a look at the flame and burner chamber of your water heater. A yellowed flame may mean the fuel jets need to be cleaned. Make sure the chamber is free of rust and other small debris.
• Inspect the washing machines hoses for loose joints, cracking or holes.
• Look for mold and mildew throughout.

Next Steps

If you find any troublesome issues during this inspection, it is time to call in a professional to get them fixed right away. Doing this simple walkthrough once to twice a year can help prevent plumbing disasters before they happen.