Here are some of our favorite water-saving tips in Pike Creek. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.
Whole House
Check for leaks you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.
Outdoors
Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).
In the Bathroom
Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
- Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
- Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
- Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
- Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.
In the Kitchen and Laundry Room
Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.
