Water Treatment FAQs

-How Do I Know if My Water Is Contaminated?

Despite the treatment that just about all drinking water gets at the municipal level, there are plenty of ways that contaminants can infiltrate your home water supply. The only way to know if they’re there and what they are is to have your water tested by a professional. Testing will identify the presence of things like excess minerals, chemicals and bacterial agents.

Once testing is done, you’re in a much better position to determine what type of water treatment system you need for your home. If your water is too hard, you’ll want a system to soften it. If there are excess chemicals in the water, filters can be put in place to remove them. And if it’s bacterial agents you have the biggest problem with, UV antibacterial lights can be installed to neutralize them on contact.

-What Is Hard Water?

Your water is hard if there is an excess of minerals in it, most commonly calcium and magnesium. These minerals are not inherently harmful, but when their concentration in your water supply is too high, they can do a lot of damage to your pipes and appliances.
Once you know you have hard water, however, it’s quite easy to remedy the situation. There are plenty of great systems on the market and your water treatment technician can help you determine which one is appropriately calibrated and sized for your home and water needs.

-How Do I Know if My Water Treatment System Is Still Working?

Just like any other piece of equipment in your home, your water treatment system can’t continue to work properly forever. Often when it stops working effectively, you’ll have very few warning signs that a problem exists. So the best way to ensure that your system is always doing exactly what you need it to do is to keep up with regular maintenance visits from a professional.

During these visits, a technician or plumber will thoroughly inspect your entire system to find any problems and clean out whatever sediment and debris may have built up over time. They’ll also change or clean all of your filters. With this attention, your water treatment system should have no trouble keeping your water safe and clean, and you won’t have to worry about how well it’s working from one month to the next.

-How Is Filtering Different from Softening?

While both water filtration and softening remove certain elements from your home water supply, they go about it in very different ways. Water softening equipment makes use of ion exchange to get excess calcium and magnesium out of your water. In the process, water softeners typically insert sodium ions in place of the unwanted minerals.

Water filters, on the other hand, actually catch and absorb particles floating in your water. Once these particles are trapped in the filter, the remainder of the water can continue on, free of contamination.

How Do UV Water Purification Lights Work?

Bacterial contaminants can be especially tricky to get out of your home water supply. Because of this, installing UV antibacterial lights after your main filtration device is essential. These lights work because the bacteria absorb the UV-C radiation as they pass by the light. This radiation scrambles the DNA inside each microbe and ends their ability to reproduce. Once they can no longer reproduce, bacteria are not a threat to the health and safety of your family.